English
0

How to flash iPhone?

چگونه آیفون را فلش کنیم؟

Sometimes the software problems of the device cannot be solved through the usual methods and users are forced to flash their phone or tablet. Fortunately, there are ways to Flashing iPhone It is also considered that in the following we will focus on two main paths to do it.



Flashing iPhone

Two basic methods include recovery through iTunes and use mode DFU It is there to flash the iPhone. iTunes is easier to use; But it may not answer in all situations and force users to go to the second option. Regardless of the method used, you should note that it is possible to delete all data on the device; So back them up if you can.

iPhone recovery with iTunes

Using iTunes to flash the iPhone is possible when the device turns on properly and there is no problem in its booting. So if you can’t turn on your device at all, it’s better to go to the next part.

1. To start, connect your iPhone to the computer (Windows or Mac) through a cable.

2. Program iTunes In Windows or Finder Open the Mac. If you are using older versions of MacOS, you can go to iTunes through the Start menu or the Applications folder.

iPhone recovery with iTunes

3. If you’re using Finder on a Mac, click your iPhone’s name in the left panel (under Locations). If you are using iTunes software, click on the iPhone icon near the upper left corner of the screen, similar to the image below.

iPhone recovery with iTunes

4. Now your iPhone should be on mode recovery put. Doing this in different models is done in a different way, which is explained below.

  • Models with Face ID: First, press and release the volume up key and then press and release the volume down key. Now press and hold the key located on the top edge of the device until the device restarts and enters recovery mode.
  • iPhone 8 and later: First, press and release the volume up key and then press and release the volume down key. Now press and hold the key located on the right edge of the device until the device restarts and enters recovery mode.
  • iPhone 7 and 7 Plus: Press and hold the upper key of the device and then press the lower volume key at the same time. After entering the recovery mode, remove your finger from the keys.
  • iPhones with home key: Press and hold the device’s home button and then press the top or right edge key at the same time. After displaying the recovery menu, remove your finger from the keys.
iPhone recovery with iTunes

5. If in the window displayed on the computer, the key Update There is, click on it. If the problem is solved with the update, the user information will remain on the device. This method takes 15 minutes and after that the device will automatically exit from the recovery menu. If the update cannot solve the problem of the defective iPhone, or if there is no such option at all, the key should be Restore Select in this window, which will end up deleting all user data.

iPhone recovery with iTunes

Use DFU mode

Sometimes the Mac Finder tool or the iTunes software in Windows cannot detect the iPhone. In this case, DFU mode should be used to flash the iPhone. After fixing the device identification problem, you can select the Restore option as in step 5 of the previous part. Entering DFU mode will be different in different models, which is explained below.

iPhones with Face ID

Since the launch of the iPhone X, we have seen the home key replaced by Face ID. This issue has made it a little more difficult to enter DFU mode compared to older models. This method can be done in all recent iPhone models, including iPhone 13.

  • Connect your iPhone to a computer (Windows or Mac).
  • Make sure iTunes or Finder is running.
  • Turn off the device. First, press and release the volume up key. Repeat the same with the volume down key. Now press and hold the side key of the device until the Power Off slider is displayed. Now drag the slider to turn off the device.
  • Press and release the side key of the device again for 3 seconds.
  • While holding the side key of the device, press and hold the volume down key. Continue this for 10 seconds. If the Apple logo appears, it means you’ve held down the keys for too long and you’ll need to repeat the steps again.
  • Release the side key of the device but still hold the volume down key for another 5 seconds. If you see the Plug into iTunes page, it means that you have held down the volume key for a long time and you have to repeat the steps again.
  • If in the end the screen remains black (but lit) then you have successfully entered DFU mode. At this time, iTunes or Finder can recognize the device.
iPhone flash

iPhone 8 and iPhone SE (2020 and 2022)

Entering DFU mode on the iPhone 8 and recent iPhone SE models is a little different than the other devices we’ve mentioned below.

  • Connect your iPhone to a computer (Windows or Mac).
  • Make sure iTunes or Finder is running.
  • Turn off the device. First, press and release the volume up key. Repeat the same with the volume down key. Now press and hold the side key of the device until the Power Off slider is displayed. Now drag the slider to turn off the device.
  • Press the side key of the device for 3 seconds.
  • While pressing the side key of the device, press and hold the volume down key.
  • Press both keys for 10 seconds. If the Apple logo appears, you need to repeat the above steps again.
  • Next, release the side key but keep holding the volume down key for another 5 seconds. If the Plug into iTunes page is displayed, you must repeat the path again.
  • If in the end the screen remains black (but lit) then you have successfully entered DFU mode. At this time, iTunes or Finder can recognize the device.
iPhone flash

iPhone 7 and 7 Plus

If you are using iPhone 7 and 7 Plus, you can enter DFU mode from below.

  • Connect your iPhone to a computer (Windows or Mac).
  • Make sure iTunes or Finder is running.
  • Turn off the device. Then press the side key of the device and hold it for 3 seconds. Swipe the displayed slider to the right. After the device turns off, press the side key again and hold it again for 3 seconds.
  • While pressing the side key of the device, press and hold the home key. Hold your finger on both keys for 10 seconds. If the Apple logo appears, repeat the steps again.
  • If in the end the screen remains black (but lit) then you have successfully entered DFU mode. At this time, iTunes or Finder can recognize the device.
iPhone flash

iPhone 6s and earlier and iPod touch

The method mentioned below is applicable for all models before iPhone 7, including iPhone 6s and iPhone SE first generation. Also, iPad and iPod touch home key models can enter DFU mode with this method.

  • Connect your iPhone to a computer (Windows or Mac).
  • Make sure iTunes or Finder is running.
  • Turn off your device. Then hold the power off key for 3 seconds and then slide the Power Off slider to the right.
iPhone flash
  • After the device turns off again, hold the side key of the device for 3 seconds. At the same time, press and hold the Home key. Place your finger on the home button for 10 seconds. If the Apple logo appears, repeat the process from the beginning.
  • Release the Power key but keep holding the Home key for another 5 seconds. If Plug into iTunes pops up, it means you’ve held down the key too long and you’ll have to start over.
  • If in the end the screen remains black (but lit) then you have successfully entered DFU mode. At this time, iTunes or Finder can recognize the device.
iPhone flash

Frequently asked questions about iPhone flash

How to flash an iPhone?

You can restore your iPhone using iTunes software in Windows and Finder in Mac OS.

What is the solution for iPhone not being recognized by computer?

If you want to flash the iPhone, but the computer does not recognize it, you must enter DFU mode and then restore the device through iTunes or Finder.

How to enter DFU mode on iPhone?

Entering DFU mode is different in different iPhone models and you should use the special method according to your device model.

More Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Most Viewed Posts
Menu